wired4biz.org

Skiing appeared to be initially a simple means of getting via 1 spot to yet another in packed or even crusted snow. For some, skiing signifies recreational alpine skiing during which 1 goes to a resort, secures a lift ticket, dons cold-weather garments, skis, ski shoes or boots, ski posts and embarks with a chair lift or different means of mechanized uphill transportation. This sport has come a considerable ways during the past half-century nonetheless. To many people whom enjoy watching it on television, it may seem like an extremely elitist sport activity, demanding a high amount of education as well as pricey gear.

Even so, snow-boarding and skiing are generally each stimulating and common wintertime pursuits. Skiing is usually most apparent to the public throughout the Winter Olympic Games. As an example, conventional competitive skiing is actually made of 4 activities; downhill (a extreme descent in a contest versus time), slalom (raced over a dramatically rotating course marked off by means of flags), the ski jump (in which contestants jump via specifically prepared jump inclines and they are evaluated at both long distance as well as form) and cross-country (in which skiers battle over a lengthy course- which range from TEN km/6 mi to FIFTY km/31 mi) on which this landscape and obstacles test strength and maneuverability. Generally speaking, competitive skiing is usually separated into 2 disciplines: racing and freestyle.

Skiing is straightforward to learn, however more challenging to master. Consequently there are actually ski classes which train everything from basic principles of turning and stopping properly, to more advanced carving and mogul methods. If you find yourself learning to ski, whatever type, a handful of critical supplies becomes necessary, including headgear, skis, ski posts, ski bindings, ski shoes or boots, ski pants, eye protection, hand protection and the checklist keeps growing.

One particular type of skiing is freestyle skiing, that is a mix of skiing methods, acrobatics and aerial skiing. Freestyle skiing started in the 1930s, while Norwegian skiers started doing acrobatics in the course of alpine and cross-country exercising. This particular form 1st started to get taken seriously in the early 1970s, while it had been referred to as hot-dogging. Freestyle skiing ended up being a demo occurrence at the 1988 Winter Olympics.

Additionally there is alpine skiing. You will discover a couple of main forms of alpine skiing, telemark and alpine. Downhill skiing thoroughly works your leg muscle groups, particularly hamstrings and quadriceps.

Next you can find vintage x-country skiing. To the rookie this is really a little just like walking or jogging. X-country skiing, otherwise known as Nordic skiing, is simple to understand and with one’s body weight dispersed over the surface of lengthy, straight skis, you are able to skim around over deep snowfall. It’s a good kind of exercising and an opportune method to investigate the out-of-doors in the winter season.

X-country skiing has changed into practically 2 distinct activities – 1 using the skating method and the other using the diagonal stride or traditional skiing strategy. Cross-country skiing really evolved into an Olympic discipline during the games which occurred in 1924. This specific type of skiing takes it’s identify from a kind of ski competition that’s 1 / 3 upward, 1 / 3 down and one third flat. A typical issue while cross-country skiing is the skier is working and inhaling hard, therefore eyeglasses are likely to fog up, which makes it hard to see plus depth perception can be pretty much non-existent. For a positive encounter on the other hand, back country skiing delivers substantial expanses of gentle, steady natural powder snow throughout rural as well as stunning high-mountain surroundings.

How about skiers who may have physical afflictions? Adaptive Skiing is the title of skiing performed by people who have physical afflictions. Recreational skiing packages for individuals with afflictions can be found at mountains throughout the world.

Next there’s snow-boarding. Snow boarding uses a single wide ski or board, absolutely no posts and includes similarities to surfing and skateboarding. Snow-boarding can be easier on the legs in comparison with skiing. Though snow boarding futures the traits of skiing sporting activities, this progressed out of surfing and skateboarding and thus is really not a kind of skiing.

Skiing and snow-boarding grow to be progressively more well-known with every single winter season. To become very good skier, you have to learn the right skiing approaches, work with appropriate gear not to mention like the hobby. If you’d prefer skiing, you’re certain to locate a excellent vacation resort someplace, as part of your price range, which accommodates the needs you have and caters to your capability. Soaring straight down the mountain with the blowing wind in your face and snow underfoot definitely epitomizes the activity.

Outside Enthusiast is a site dedicated to those who have a love for the great outdoors and a passion for sharing the amazing outdoor activities nature has to offer with family and friends. For more information regarding skiing styles come visit us at http://www.outsidenthusiast.com

The Essential Fly Fishing Technique

Czech nymph fly fishing was introduced to the UK during the 1990 World Championships. The Czech team beat the UK International teams on the Welsh River Dee. The Czech team caught grayling in numbers from places that were thought impossibly fast or deep previously by traditional fly fishermen. This sent shock-waves through the world of competition angling. The technique is today considered to be pretty much a standard – an essential part of every grayling anglers armoury and great for trout and other fish.

Firstly, let’s take a look at the flies, the Czech nymph has many, many variations, but all are based upon one simple design, utilising a heavily-leaded hook. They are intended to be fished very deep, in fast water, weight & a slim profile are important.

Czech Nymph Fly Fishing Tackle

A 5 or 6-weight rod will be sufficient, 9′ to 10′ is ideal for better control of the flies. Leader should be of about 9′ in length, NOT tapered as they are counter-productive as tapered leader won’t sink quickly enough. Just use something like 6lb down to the top dropper, with 4lb from there down. Use two 5-6″ droppers, one about 18″ above the point fly, the other about 18″ above that. The true Czech method is to fish the heaviest nymph on the top dropper, so that it helps carry the other flies down to the correct level. To help ensure rapid sinking of the flies, degrease the leader. You will be looking for takes on the end of the fly line, so depending on your eyesight you may wish to use some sort of bite indicator.

Czech Nymph Fly Fishing Tactics

• The water will be fast flowing water, normally considered to not be able to fish on using a fly, probably 18″ – 3′ deep. You’ll want to get your flies as near to the bottom as possible. Do not fish with more than about 3-4′ of fly-line outside the tip ring. This is difficult to do, as the fly fisherman’s natural tendency is to shoot a bit of line.
• This is extremely short range fishing, fish will be close to your rod! Do not cast conventionally, there is not enough line & the nymphs are far too heavy – the nymphs that provide the casting weight. Use a flicking action to throw the nymphs upstream at an angle of about 30 degrees. Done correctly, the ‘flick cast’ will extend the leader so that the nymphs lie in a straight line upstream. They will immediately start to sink rapidly as the current brings the flies back down towards you.
• To stay in touch with the flies, don’t retrieve any line, just track round with the rod, raising & lowering the tip as appropriate. Watch your indicator very closely! Any hesitation, draw, stutter, check – strike it immediately.
• Because of the fast nature of the water grayling and trout will have little chance to closely examine the fly and hit quickly. Fan cast the water ahead of you and, if no action, take a pace or two upstream & repeat. This is fast fishing, each cast is fished out in 5-10 seconds and you’re straight into the next one, a lightweight rod helps the weary arms. Often it is often useful to let the flies come down below you and allow them to fish for a few moments as they come round the bend and onto ‘the dangle’.
• Keep the rod tip above the indicator & steadily ‘lean’ downstream, dropping the tip as you do so. This can be a particularly effective tactic, taking one or two more fish out of water that has already been worked.

Obviously, with this technique you do not need to restrict yourself to Czech nymphs. The key is to use heavily-weighted flies, so gold-head / bead head flies, heavy tungsten nymphs will do just as well. ‘Matching the hatch’ is not a priority with this fishing! This is an active searching method and, as such, technique is more important than specific pattern. This sent shock-waves through the world of competition angling. The technique is today considered to be pretty much a standard – an essential part of every grayling anglers armoury and great for trout and other fish.

Firstly, let’s take a look at the flies, the Czech nymph has many, many variations, but all are based upon one simple design, utilising a heavily-leaded hook. They are intended to be fished very deep, in fast water, weight & a slim profile are important.

Czech Nymph Fly Fishing Tackle

A 5 or 6-weight rod will be sufficient, 9′ to 10′ is ideal for better control of the flies. Leader should be of about 9′ in length, NOT tapered as they are counter-productive as tapered leader won’t sink quickly enough. Just use something like 6lb down to the top dropper, with 4lb from there down. Use two 5-6″ droppers, one about 18″ above the point fly, the other about 18″ above that. The true Czech method is to fish the heaviest nymph on the top dropper, so that it helps carry the other flies down to the correct level. To help ensure rapid sinking of the flies, degrease the leader. You will be looking for takes on the end of the fly line, so depending on your eyesight you may wish to use some sort of bite indicator.

Czech Nymph Fly Fishing Tactics

• The water will be fast flowing water, normally considered to not be able to fish on using a fly, probably 18″ – 3′ deep. You’ll want to get your flies as near to the bottom as possible. Do not fish with more than about 3-4′ of fly-line outside the tip ring. This is difficult to do, as the fly fisherman’s natural tendency is to shoot a bit of line.
• This is extremely short range fishing, fish will be close to your rod! Do not cast conventionally, there is not enough line & the nymphs are far too heavy – the nymphs that provide the casting weight. Use a flicking action to throw the nymphs upstream at an angle of about 30 degrees. Done correctly, the ‘flick cast’ will extend the leader so that the nymphs lie in a straight line upstream. They will immediately start to sink rapidly as the current brings the flies back down towards you.
• To stay in touch with the flies, don’t retrieve any line, just track round with the rod, raising & lowering the tip as appropriate. Watch your indicator very closely! Any hesitation, draw, stutter, check – strike it immediately.
• Because of the fast nature of the water grayling and trout will have little chance to closely examine the fly and hit quickly. Fan cast the water ahead of you and, if no action, take a pace or two upstream & repeat. This is fast fishing, each cast is fished out in 5-10 seconds and you’re straight into the next one, a lightweight rod helps the weary arms. Often it is often useful to let the flies come down below you and allow them to fish for a few moments as they come round the bend and onto ‘the dangle’.
• Keep the rod tip above the indicator & steadily ‘lean’ downstream, dropping the tip as you do so. This can be a particularly effective tactic, taking one or two more fish out of water that has already been worked.

Obviously, with this technique you do not need to restrict yourself to Czech nymphs. The key is to use heavily-weighted flies, so gold-head / bead head flies, heavy tungsten nymphs will do just as well. ‘Matching the hatch’ is not a priority with this fishing! This is an active searching method and, as such, technique is more important than specific pattern.

Andy is CEO of The Essential Fly, a quality manufacturer or fly fishing flies, fly fishing tackle and gear and fly tying materials

Andy is a passionate fisherman and always looking at new materials and flies and their effects on the quarry fish. Andy has been lucky in fishing all around the world for many different fish species including salmon, trout, steelhead, pike (or muskie) through to sailfish and marlin.

Mostly Andy loves any excuse to go the the river, lake or sea and simply enjoy the delights of fly fishing. In his spare time Andy is totally hooked on fishing and spends time designing new fishing flies including steelhead flies, trout flies and pike flies and designing new and innovative fly fishing gear and manufacturing them cost effectively.

Automotive advertising agencies have been forced to take on additional responsibilities in today’s troubled economy. As the President of national network of independent affiliated automotive advertising agencies and the host of an auto industry social networking resource portal I recently promoted the 2010 NADA Convention on my blog talk radio show as a real world venue similar to the online resources that I rely on to listen and learn and contribute to so I can presume to teach.

I consider the NADA convention as a must attend event for automotive advertising agencies, auto dealers, auto industry vendors and decision makers that regularly tune in to listen and learn from the auto industry experts regularly featured on various online resources. The NADA Convention is the real world version of online social networking communities focused on sharing best practices for the auto industry and a perfect platform to make new friends and connect with old ones in both the real and the virtual world.

The NADA Convention is a means to stay ahead of the competition by learning about the new Internet technologies and applications being introduced by the vendors and speakers that will be featured at the convention. The 2010 NADA Convention is being held in Orlando, Florida this February 12th. through February 15th., 2010 at the Orlando Convention Center. Additional information on the convention is available at their site — NADA.Org — and their online pre-registration savings of $50 -$75 has been extended to January 27th., 2010. I strongly advise anyone seeking to survive in today’s consolidating auto industry to register before the deadline to take advantage of the discount with the confidence that your investment of your time and money will provide a R.O.I. that can’t be duplicated by any online auto industry-centric venue; including my own.

My affiliated agencies are connected by a proprietary online communication/distribution system I developed in December of 2001. I designed the operating system that links this national network of independent businesses as a means to leverage the resources of the participating automotive advertising agencies, production partners and select vendors to allow them to compete with national automotive advertising agencies. The resulting savings in fixed and semi-variable expenses coupled with access to a wide variety of production and creative resources for the member agencies was made possible through their use of several online technologies that were developed to support the growing World Wide Web.

I reference this history as evidence that I have practiced what I now preach. These same technologies must be applied to the internal processes of auto dealerships to allow them to survive in a consolidating auto industry. The combination of the resulting efficiencies realized in technology enhanced selling systems in brick and mortar auto dealerships integrated with their online showrooms, and the newly developing applications being applied by automotive advertising agencies to promote their auto dealer clients on the Internet, is the key to profitability today and survival tomorrow.

The NADA Convention allows auto industry vendors to present new cutting edge applications to auto dealers and automotive advertising agencies who are anxious to gain an advantage over the competition. More importantly, in a consolidating auto industry auto dealers must sell more for less to satisfy budget conscious and better educated online car buyers and the technology being applied to sell vehicles on the Internet Super Highway is the way to do it in a scalable and cost effective manner!

The blog talk radio station featured on my portal is another example of how a new technology platform can enhance the reach and performance of an automotive advertising agency in today’s Internet driven marketplace. I use various blog talk radio shows as an online communication system for my network to share best practices and new vendor applications with site visitors surfing the web to get the inside story on the auto industry. In addition, my shows attract new vendors anxious to tell their story to the decision makers who follow me on the World Wide Web which allows me to review cutting edge automotive advertising applications before competing agencies know that they exist.

Several vendor clients of mine were discovered during their online reviews and most of them will be represented at the NADA Convention. Why? Because the NADA Convention is the perfect real world venue to launch new products and services and this year is no exception.

Automotive advertising agencies know that they must apply cutting edge automotive advertising technologies to their online marketing plans that integrate with proven selling processes in their auto dealer clients’ real and virtual world showrooms but they don’t know where to find them. Online automotive advertising focused social networking sites provide an excellent filter to find the newest and the best but the NADA Convention is the place to see them all in one place and one time in an environment where the decision makers from both the automotive advertising agency and the vendor can sit across the table and work out the best deal for both. After all, what are friends for!

Philip Zelinger is a former auto dealer principal with an earned reputation as a nationally recognized automotive advertising expert specializing in the technology sector. His philosophy that a rising tide floats all boats motivates him to listen and learn so he can presume to teach. To that end, Philip shares best practices on the respected automotive advertising resource networking portal — http://AdAgencyOnline.Net — as well as the blog talk radio station featured on the site — WAAOL, All Automotive Advertising News All The Time — http://blogtalkradio.com/adagencyonline.

For a complimentary consultation on your automotive advertising needs, or to share your wisdom and insights with the online automotive advertising community hosted by Ad Agency Online, L.L.C.. vist the portal and contact Philip Zelinger directly. To quote Philip, “Help is only a click away because — after all, what are friends for!”

After all, what are friends for!

Doing auto repairs at home is one of the best ways to keep a car in tiptop shape. Home auto repair is cost-efficient, too, because you can save on professional fees. All it takes to fix your car is a substantial amount of know-how plus a collection of quality tools.

For most people, doing things themselves has its own rewards. The most obvious benefit is that they get to save their hard-earned dollars. When it comes to auto repair, the same mindset applies. It is not surprising why there are many people who still prefer to fix their car in the comfort of their own homes instead of bringing their vehicle in for commercial auto repairs.

Home auto repairs allow car owners the chance to work closely with their own vehicles. They get to tinker around with their cars to identify if it needs tuning up or if a certain part needs replacing. Home auto repairs leave the responsibility in the hands of the car owner. Owners would not have to worry about mechanics mishandling their vehicles or charging them huge fees for simple auto repairs.

If you are planning on repairing your vehicle in the comfort of your own home, do thorough research first. The World Wide Web holds a lot of information regarding auto repair as well as do-it-yourself vehicle maintenance. You will also find a lot of car tips and trivia online.

It would also be wise to amass a collection of commonly used car tools and equipment. Wrenches, screws, jacks and bolts are among the tools you need to get together. You can buy ready car tool kits on the Internet. Do some comparison shopping. Look around for the best deals. Once you have narrowed down your choices to the tools that provide you with the most value for your money, it is easy to have them delivered right to your doorstep.

Auto Repair provides detailed information on Auto Repair, Auto Glass Repair, Online Auto Repair, Auto Body Repair and more. Auto Repair is affiliated with Discount Auto Parts.

Televisions have come a long way since their invention by Philo Taylor Farnsworth in 1928. Today, Liquid Crystal Display sets, known as LCD televisions, are one of the most up to date types of televisions you can purchase. They are competing with other types of televisions, including Projection TV, Light Emitting Diode (LED) televisions, Plasma TV, HDTV, and new Organic Light Emitting Diode (OLED) television sets.

LCD televisions today are full color televisions sets. They produce images using liquid crystal display technology, which also allows them to be quite a bit thinner and also lighter than the old cathode ray tube sets. The screen displays can be much larger than those allowed by CRT technology. With falling costs of production, the LCD televisions seemed destined to overtake the industry. Other large television formats, such as rear projection television and plasma television are losing market share to the new LCD televisions. There is, however, new competition against LCD televisions by Organic Light Emitting Display televisions and others on the horizon.

LCD televisions work with white light, and filtering that light to display a colored image on the screen. This requires backlighting by cold cathode fluorescent lamps on most sets. Some use LED lighting instead for the white backlighting. LCD technology is inefficient in that most of the light, about 90% of light produced never reaches the viewer as it is used or distracted prior to reaching the viewing screen. They take a lot of power, which adds to the inefficiency and they are similar in power use to the CRT televisions.

This television uses a system of LCD shutters in a grid, which allow different amounts of light to pass by opening and closing the shutters. There is a colored filter with each shutter that removes unnecessary colors, all by the red, green and blues, from the white light passing through the shutter system. These work to form a tiny pixel, and the shade of each color is adjusted by changing the light intensity. There are millions of shutters in a display. Voltage controls turning shutters on or off. The liquid crystals form thin layers that make up thin plates. These plates allow polarization of the light and control of light passing through the shutters. Improvements in technology have addressed some problems with blurring and response times, and the first commercial LCD televisions hit the market in 1988. By 2004, the first 42″ sets were being purchased quickly, and in later years prices dropped. LCD televisions were competitive against plasma sets because they have higher resolutions, and therefore better pictures. By 2007, screen display panel sizes were offered up to 108″ in size.

There was some concern with environment effects of the nitrogen trifluoride used in production of LCD screens, as it is a potent greenhouse gas, but critics point out that actual amounts released to the atmosphere are far less than the perfluorocarbon gas that it replaced. LCD televisions remain popular and comprise a large segment of the commercial television set market.

Matthew Kerridge is an expert within the television industry. If you are looking for cheap lcd televisions please visit http://www.ebuyer.com/

An experienced fisher knows, in order to fully enjoy the fishing expedition, all the necessary fly fishing supplies must bring along. If you has engage a guide, some time the company may supply you some fly fishing supplies, such as vest, reels, fly lines and leaders, flies, tackle storage and dry shakes. However, some touring companies may request you to bring your own fishing supplies, such as fishing clothing, watercraft, combos, and as well as your own waders.

Buying Fly Fishing Supplies

There are many fishing stores that sell fly fishing supplies. For fishers who live in cities close to the ocean, to extensive lakes, or to major rivers, where fly fishing is a popular sport, you should much easy to locate the fishing stores that sell fly fishing supplies or you can have them deliver to you through online ordering.

Fishers can buy the fishing supplies through internet, it is very convenience for those who need to travel outside of their own city to enjoy fly fishing trip. Online shopping means that you can get all the fishing supplies you want right from home. There are many websites on the net that are just as trustworthy as your old neighborhood fishing stores. You can get everything from flies to hooks, and reels to whole fly fishing kits and benches, all at different prices. Whatever you need to do is just a mouse-click away.

The fact is that you cannot check and test the supplies out yourself online. So, for the new hand fisher, try to purchase the supplies at a physical store when possible. The trick to getting good fly fishing supplies is to have a place you trust, where you can ask questions, you can get great rods and lures, well-made, effective flies and materials to tie flies with. You can test out the various reels and choose the ones you are most comfortable with. For inexperienced fishers, it is better you do some research online, in books or asking experienced friends before purchase any fly fishing items.

How to maintain Fly Fishing Supplies?

It is not so difficult or time consuming to carry out the maintenance of fly fishing supplies. But one important thing you must know is always wash and clean all equipment in warm water and mild detergent, particularly when you have used the equipments in saltwater. Next thing is before storing the equipments, make sure there are completely dry. Always protect and take good care for all the equipment away from the sun, rain, dirt, humidity, cold, heat, and any other conditions that may cause corrosion.

Collecting fly fishing tackle

Collecting fly fishing tackle can be fun and very enjoyable in many ways. Nowadays, the enthusiastic fisher is also become a collector of antique and classic fly fishing tackle.

For the new collectors, you should have, at least, had some knowledge on how the equipment was adapted for different types of angling.

History of Fly Fishing Tackle

Did you know that fly fishing can trace its roots back to nearly 2,000 years ago? The first account of fly fishing tackle is commonly credited to a Roman named Claudius Aelianus, a 2nd century teacher of rhetoric and roman author. When he described a fishing technique used by the Macedonians fishers on the Astraeus River used an artificial fly lure to catch fish.

Fly fishing as known today, beginning at the Scotland and Northern England, and expanded to the rest of England, the Scandinavia, Canada, United States and the Alpine mountain regions of Europe. As is naturally expected, the expansion of fly fishing to such different parts of the globe, the advent of the machine age and other advances in technology resulted in different styles and development of fly fishing tackle. A clear example is with high-tech carbon, fiberglass and steel replacing the stick and nylon replacing the horsehair line, but the goal is still the same. Numerous of those old reels were crafted by the hands of artisans with both great precision and great beauty.

Finding Collectible Fly Fishing Tackle

Finding collectible Fly Fishing Tackle is not tough, but it will take some time for searching. So, just relax and prepare to spend money and time; with some luck, you may able to find a significant and valuable assortment of such Fly Fishing Tackle. Following are few ways to look for collectible and valuable Fly Fishing Tackle.

First, try to subscribe to one or two magazines that talk about the fishing collectibles. The magazines usually will touch on the different kinds of collectible fly fishing tackle, and it will also provide information, like where to purchase, the manufacturers were, the suppliers, use, give the history, and the tradition of such collectible equipment.

Second, is the online internet market? The Ebay.com has more fishing gear than you could ever imagine, new and used one. No of auction houses also have several fantastic fly fishing tackles at auction. Langs Sporting Collectibles is one of the best for this. You also can try the some bloge and other online collector websites.

Third, another helpful source of information are books that can be found at bookstores or libraries, fly fishing clubs, friends, relatives and stores that specialize in collectible and antique items. Another place you can try is some old fishing stores, they still may have classic and antique fly fishing tackle, and the owners of such stores usually has stories to tell, just as each fisherman does.

The fly fishing collectors should also invest time, study and learning about common defects, monetary value, ratings on condition, construction techniques and maintaining, all this information definitely will help add value during your searching of the fly fishing tackles.

Cindy Heller is a professional writer. Visit Fly Fishing Women to learn more about vintage fly fishing tackle and arkansas river fly fishing.

Anyone who has seen the Lamborghini Reventón or the Aston Martin DBS knows that unmistakable feeling. It’s the thrill & the allure of the exotic sports car, overhauled & updated for the 21st century. Since their inception, sports cars have continually pushed the boundaries of both engineering & art. These are the cars that exemplify speed, power and beauty.

Alfa Romeo: The Grandfather of Exotic Sports Cars

Alfa Romeo first began producing racecars in Milan, Italy in 1910. Their first endeavor, the HP 24, turned some heads with its superior speed and handling. Chief Designer Giuseppe Merosi worked on all Alfa Romeo models from 1910 to 1923. When Merosi retired, racecar driver Enzo Ferrari persuaded Vittorio Jano to leave Fiat and take over Merosi’s work.

In 1925, Alfa Romeo unveiled the P2 Grand Prix Car, Jano’s first car with Romeo and widely considered the first “supercar.” The P2 was powered by a straight-8 cylinder supercharged engine, and placed first in 14 Grand Pix races between 1924 and 1930. Today, the P2 Grand Prix is considered one of the most rarified of the collectible antique cars, with less than a dozen still intact.

This year marks the return of Alfa Romeo to the United States. Their current sports car, the 8C Competizione, is stunning with its sleek lines, 4.7L 6-cylinder engine & a top speed of 181 mph. This car is destined to send ripples throughout the US market.

Ferrari: High Performance, Luxury Cars

After racing Alfa Romeos in the 1920’s & 30’s, Enzo Ferrari decided that he wanted to build his own racecars. He prototyped a few models in the 1940’s, but it wasn’t until after World War II that he found success. Notably, Ferrari’s exotic sports cars took first place in the Formula 1 World Championships, 24 Hours of Le Mans and the World Sportscar Championships throughout the 1950’s.

Ferrari’s Gran Turismo series remains its most successful lines, with the 2007 599 GTB Fiorano bringing even more luxury and innovation to the table. Patrons of the Ferrari Club of America cite performance as the primary reason for purchasing a Ferrari over other collectible cars.

Lamborghini : Exotic Sports Cars for a New Generation

Ferruccio Lamborghini had a successful business building tractors in Italy before his eyes turned to the exotic sports car. And it wasn’t a love for performance that stirred his fire, but a disdain for Enzo Ferrari.

According to Lamborghini’s family, Ferruccio purchased a Ferrari 250 GT in the early 1960’s and was unhappy with the handling & response of the clutch. He brought it into Ferrari’s factory and met with Enzo Ferrari to voice his concerns. Ferrari was immediately upset with Lamborghini’s complaints so he mocked Lamborghini and sent him away. Lamborghini went home, dismantled the car and discovered that the clutches installed in Ferraris were from the same manufacturers he used for his tractors. He installed a new clutch and vowed to create a higher-quality, luxury sports car than Ferrari.

While Lamborghini has countless models that produce awe and wonder in car enthusiasts, it’s the 1974 Countach that remains their most iconic. Designer Marcello Gandini, then just beginning his career, placed his focus on style over aerodynamics. With its scissor doors, sharp lines and low, wide frame, the Countach raised the bar for Lamborghini. The Diablo, the Murciélago, and even the 2008 Reventón follow in its wake.

Aston Martin: Unforgettable Collectible Cars

Britain’s Aston Martin was founded by Lionel Martin & Robert Bamford in 1914. They designed exotic sports cars and drove in competitions, but it wasn’t until David Brown became managing director of the company in 1947 that they were able to establish themselves as a maker of high-quality, high-performance sports cars. They introduced the DB line (DB standing for David Brown) in 1950, and many of their models have become synonymous with antique and collectible cars.

Newer DB models include the luxurious DB-7, which was designed by Ian Callum and produced from 1994 to 2001. This model won the Jim Clark Award in 1995, and remains Aston Martin’s most successful car to-date.

Where to Find Collectible Cars for Sale

Buying and selling exotic sports cars is a specialized process that requires a credible and secure collector car trader. Some of the best experts are other exotic sports car owners. To find out more about buying and selling antique cars or classic collectible cars the first place to look are exotic sports car clubs such as http://www.lamborghiniclub.com or [http://www.exoticcarrental.com/FerrariClubs.com]

Interested in online car dealers that specialize in buying and selling exotic sports cars? Check out http://www.chooseyouritem.com/exotics/dealerpage.html, ebay classic cars and a new website called [http://www.HighEndCrazy.com] These sites will get you started on the road to driving the exotic sports car of your dreams.

John Green is an Electrical Engineer who has worked for prestigious companies, such as Kimberly-Clark Corporation and Union Switch and Signal Corporation where he oversaw completion of large commercial projects. John was frustrated with hard to use websites while selling some luxury merchandise online. So he teamed with his brother, Richard, to develop a website for buyers and sellers of luxury merchandise. Visit: [http://www.HighEndCrazy.com] or email highendcrazy@bellsouth.net for more information.

I worked at a Profession that was a Family Tradition my entire working career.

I started out working after class got out, every day through High School, while a Teen.

After that, I went to College during the Mid – Seventies.

• Through the years, I was simply too caught up making a living to realize what else I would enjoy doing.
• The money and benefits were good, so I stuck with it until I retired.
• I have always had an interest in Psychology and Writing.
• There was this prevailing Feeling within, constantly reminding me to follow my Heart and choose a different Profession.
• I never knew what that would be, until recently.
• Do any of the above Ring true for You?
• I decided that if I were to do a Midlife Career Change, my Career Choice would have to be one that not only inspired me, but could be worked at directly from home.

I was able to take an early retirement at age 55. I desperately wanted a change in career. I was searching for something I would have a passion for doing. I wanted to do something on the Internet, but did not know what I wanted to do, or how to go about doing it.

I searched and searched, and ended up confused and completely frustrated with the information overload I absorbed from the Web.

I recalled all those Career Assessment Tests I took way back in College. I remember one test told me I had the personality traits of a Bus Driver and College Professor. Interesting… I had forgotten what the other tests told me about me.

I was looking for something I could do on the internet as a business. I went to various Career Test Websites and took some of their practice tests to see what my aptitudes were.

I did not come up with any suggestions I favored. These Tests were free tests I took, but each one told me something different about myself. There did not seem to be any consistencies I could recognize.

So, maybe you want a Second Career too. But, This time around, you want to do something you are Passionate about. Why do it any other way – Especially, if you did not like your previous profession that much? You do not want to choose something to do you will not like doing again, right? You want to Love doing it this time. Now is your chance to do it right.

Maybe you are a bit UNSURE about what it is you would fit into as a brand new career. No problem. There are Career Assessment Tests you can take that can help you. There are also Free Tests, but you have to be careful. If they are not researched and Scientifically validated tests, the test results may not be as reliable as you would like.

You could end up choosing the wrong education and training for a career you really don’t have the interest or aptitude for. The Test may say you are more of an Artist type, when in fact you love Public Speaking and are an Extrovert. This potential Career Mismatch could mean a lot of wasted time, effort, money and one big disappointment and heartache.

Teens looking for their first job, and someone making a Midlife Career Change may have something in common. They may be both unsure about what it is their passion resides in. If you are middle aged, you have an advantage, that you at least have had a career or two under your belt. A teen may not have even been employed once.

If you already know what your passion is, fine. But, if you do not, you will have to search yourself for it. Discovering Mine came late. But, Better late than never. Find your passion and Verify it through the Sounding Board of a Career Test. This will Make Certain you have the Career Aptitude and Working Personality for doing the Career Choice you have in mind. You can always receive training and the schooling to fit your passion and make it into a Career Reality.

You Do Have Options…

• Find out what you Love to do or are Passionate about, be it a Hobby or any Special Interest.
• Then take a couple Career Aptitude and Personality Assessments to reality check the possibility of turning it into a Career.
• Study the list of compatible careers in the printable read out which they will give you after you take the Career Test.
• If the tests you take are Scientifically Validated and Reliable tests, the suggestions and results from the various tests will collectively parallel each other.
• In other words, you will start to hear the same things ringing true about your skills, abilities and interests over and over, as they pertain to certain repeated Career Recommendations.
• Do the research about what the Job Duties are for your Dream Job, and judge for yourself if you are going to like to do them or not.
• Visit and talk to those people within those jobs. Get it first hand from those who know the best.
• Weigh all outward Data received against your inner Personal Core Values.
• Know How much all the training costs, where it is and how long it will take to complete.
• Figure out how you are going to put your plan together. Make a strategy with small doable goal steps to pull the entire plan into one big clear picture.
• Will you work at your old job and train for the another in your spare time? It has been done, and it still can be. You can do it if you make it one of your personal priority career goals.
• You can also create a budget plan, if times will be on the lean side while financing your new career training.

To Change Careers or Not

You don not have to make a Mid Life Career Change at all. You do not have to do anything but what you want to do. You can keep things just the way they are. It’s your life, live it your way. Chances are that if you are here now, you want another career.

But, You do have options. All we need to do is examine them. The most important thing to do is to examine you and question how you feel about you, your life, the world and where it is you think you want to fit.

What things do you want out of life at this point? You could have made a name for yourself in your last career and made your money, raised a family and now you wonder what to do next?

You may not even need to work. Maybe you want to work and find that last career that represents who you are. You want a career change for what it will mean to you. You seek meaningful employment more than the money.

Chances are that you continue to need the extra income, but either want to retire or quit what you’ve been doing for the last 20 or so years because you have had enough of it and it’s time to move on. Maybe you want a part time job. Maybe you don’t even know exactly what you want, but you want to explore and see if there is anything out there for you or not.

So, Why even Change Careers to begin with?

Is it because Your Job is Not YOU anymore?

In other words, has what you value in a job changed?

Did you choose your profession a long time ago, and the job became a career mismatch?

Maybe the job doesn’t do it for you anymore. Maybe it’s a boring, not challenging, tedious, energy draining job, etc.

Maybe there Is there no single reason other than you simply want a change. That’s OK. Maybe you are just tired of doing the same thing for over twenty years. This is OK.

You could be going through a Midlife Crisis where you are beginning to question a few things about your past and present life.

Statistics show that it is not uncommon for people change careers at least three times in their working years.

Why not change careers, what’s the problem?

It’s not like you are Married to it, right? There are similarities though, like familiarity, security and predictability. You know what you have to deal with on a daily basis and there are usually no surprises. On second thought, Maybe in a way, we have become Married to our Jobs. But the question is, is it a happy or unhappy Job Marriage?

There is a lot to making a Midlife Career Transition happen. It’s harder adjusting and doing everything related to changing your career than when you were young. Everything is harder now. Maybe you don’t even feel as good as you did and do not have the energy you had. That’s probably why some don’t do it. The new Career takes researching, job interviews, training, returning to school, or possibly working part time in your newly chosen field to see if you like it or not. You may even be worried about age discrimination, finances for training and living expenses. It takes a lot of effort and energy. Maybe you would rather not. All this is even making me tired.

Nevertheless, How do you take an inventory of YOU if you would like to make a Career Change in Midlife, but are afraid to do so. Start Thinking about those skills or jobs you like doing. Also, think about those jobs or duties that you don’t like to do so you know what to avoid. What Hobbies or special interests draw out the passion in you. Who says you can’t turn a hobby into a full time job? Did you have any part time jobs you liked in the past? You can even go so far as to try to remember what it was you wanted to do when you were a kid – A Doctor, a Lawyer?

If you are over 55, you have to admit that some professions are probably unattainable, because you don’t have enough time left to live. You may not want to go to school again for another ten or so years and then build up your business or practice through time – Which is another story in itself.

Thankfully, There are Careers in between – Some that require technical school training, or certification. These Careers don’t take near as long to master. Again, it depends on what you are willing to do in order to get the new career you want. It is never too late to go to school for ten years if you want to, and it is your life to spend any way you wish.

• Remember – The older you get, the wiser you have to be about where and how you spend your remaining years.

I am sure someone has decided to become a Doctor or a Lawyer when he was 55 and then began his education. Maybe by 65 he had served his internship and residence and got his degree and started his practice in his own home town. It’s possible.

The question to ask yourself is this – If you really want to do something, and it takes four or more years to get there and you do not start to do it now, where will You be in four years? You guessed it, you will be right where you are right now. And, You will be wondering why you did not do it, and may regret not doing it, because you would have been done with the training and starting in the career by now.

But, if you look back and are glad you did not do it because you changed your mind about it in the meantime, then passing it up was a good thing.

If you would love to do a certain occupation, why not start training for it? What else are you doing that is better? Will you Stay in a Soul Killing Job that you are in presently, or making an attempt to get out of it through training for something else? Isn’t it better to train for something new that you’ll love rather than keep the same Status?

As long as you are alive, you have a Future.

Questions to ask Yourself

• Are you a people person, or would you rather work with things?
• Do you like working with Statistics and Data?
• Do like to Lead? Do you like instructing others, or Teaching?
• Are you a natural born Salesman?
• Are you mechanical? Do you like working with your hands? Fixing things?
• Are You Artistic?
• Do you like working outside?

Can You See You in the Job Picture?

Thinking about those things you like to do and the conditions you prefer on the job can determine what Career Choice is best for what you are made of. Only you can know what it is you like. If you do not already know, you can find it out through taking a Career Assessment Test and choose from a list of Career Choices the Test recommends. Matter of fact, taking the test is part of being able to set career goals and plan for your new career.

Be open to new ideas from any source. I personally like to look through Mother Earth News Magazine for business and career ideas. I like reading about the do it yourself stuff on a farm, and articles on going solar. So, Pick up your favorite magazine and page through it and check out the local classifieds for business opportunities, or even employment. These are all potential Career Choices.

Investigate what it is you are interested in and passionate about. Even if you don’t know what that is, investigate anyway. You will eventually find your Dream.

You have been focusing on the Money factor most, if not all your previous career and life. But From Now on, try focusing on the Fun Factor. Look to a new Career for the enjoyment of it, not the money. You may have needed more money before, because you had a family to support. Now, it may be somewhat different financially.

If you do what you love, you will be willing to work harder at it that much longer each day. It will still seem like work, but there will be a distinct difference. It will be work you love to do. You will not have to be dishonest with yourself and cover up your distaste for a job you hate doing anymore. You may already know what working hard at a job you hate brings into your life.

This way, if you are hard working and (most importantly) true to yourself and to your own happiness, the money will come later because of all your loving toil and diligence. Think about the concept of making money at something that is fun to do – Would that not be nice doing just that?

What you love attracts the same positive vibes and material conditions, what you hate brings Negativity. Stop doing what you dislike, it will never bring Success to you nor to anyone who depends upon you. There is no Success without Fulfillment.

Why not start to Be who you want to be, and do what you want to do. If you already have not done this, Try Thinking how you want to think. Not how you think others want you to. And, start doing those duties and activities that bring you the joy and the passion you’ve always wanted. The focus has always been on hard work. Change the focus to enjoyable work. Would it not be great if you focused on who you wanted to be and acted that out instead of focusing on deadlines based on money and people you would rather not be around?

When you find and do what you love, you will come across like minded people…You will have something in common with and be surrounded by Your own kind.

Deadlines are dead. You are alive. Change your scene. Change your life. Change your mindset. Don’t let someone else define YOU. You define YOU from now on. Who do you want to be? You can be that person, you know…Only if it is true to being YOU and to who you are.

The Occupational Outlook Handbook by the US Dept. of Labor is filled with hundreds, if not thousands of Careers. Learn about each one you are interested in. More than that, seek those Career Opportunities that make you feel Passionate. Would it not be great to be so restless at night that you could not wait to get up in the morning to go to work? Well, maybe we don’t want that much excitement, do we? Maybe, maybe not. At least not right away. But, you can grow into it slowly and start liking it.

We sleep a third of our lives, and work a third of our lives. With so much time preparing for work, should not work be a Pleasure instead of a dreaded chore?

After you take a Career Assessment Test and have your Career Choices in hand and have made your choice, then it is time to put a plan together. This means where the education is located, how long it takes to complete the program, how you are going to pay for it, putting together a resume, practicing up with your job interviewing skills, possibly a part time job in your chosen profession, goals and steps to achieve the same, etc.

A way to bypass job interviews and resumes etc., is to become self employed and Work from the comfort of your own home. This is the golden opportunity for those who are Midlife Career Changers. You are older, wiser, mature and solid in those things you want. And you can still find yourself through the right second and possibly last career. You may have the savings to put you through the necessary training for that work at home job.

There are many legitimate work from home businesses to choose from. There are franchises and there is also your own knowledge of a business you have already been in that you could turn into your own. Sometimes, being your own Boss can be the key to the experience of job happiness.

You may have all the responsibility, but you can still call all the shots your way. Well, realistically not everything will be your way, but you will have much greater latitude in making business decisions without having to answer to someone.

Probably one of the most important aspects of Mid life Career Change is having a plan. Equal to that is support from family and friends. They need to be behind you on this one. Without support, you will be hard pressed to make anything happen. Sell everyone on what you are about to do. Put your finances in order. Sell your plan to them. Get the right feedback you need. Make them feel good about what you are about to do. Calm their fears while Dealing with your own.

It takes time to put a Plan of Action together. A Career Guidance Counselor can help. He/She can guide you by suggesting Career Tests and even help you plan for the education, and assist you with your own job placement.

Steve Humphreys

http://www.career-test-for-teens.com

Key to ideal career discovery is self-knowledge. Find, develop, and plan your career choice with our self-help resources. Teens, career changers, or job searchers will find helpful advice and articles about career tests, resumes, interviews, and more. Let us help you find your dream career on your journey.

Free ebook http://www.career-test-for-teens.com/career_ebooks_download.html

Many people start to look into why their lawnmower, snow blower, or chainsaw doesn’t start or run properly only to fail and curse in frustration. There is a reason for this that anyone can overcome just by avoiding these 5 common errors.

1. They have no plan of attack. If you were to decide to put a garden in your backyard or to build a garage to work out of you wouldn’t just start cutting wood and nailing it together. You would in fact purchase a design or create one yourself. If you are going to resolve the issues with your small engine equipment, you must have a plan of attack to avoid repetition and to ensure you cover all the bases.

2. They never check the basics. There are a few simple things that every internal combustion engine must have to operate properly whether it’s on your boat, car, lawnmower, or trimmer. These are: Compression, Spark, and a Proper Fuel/Air Mixture. You cannot attempt to resolve your small engine problems without knowing if these things exist at acceptable levels in your unit.

3. They don’t check things properly. The biggest thing I see on the internet in forums and blogs about small engines is that they claim to have spark coming to their sparkplug but the engine won’t fire and fuel pours out the exhaust or the plug is wet. Spark performs differently under compression then it does without it. You cannot accurately test for spark by resting your sparkplug against the engine and cranking it over. If your ignition module or sparkplug are weak and not providing sufficient output (about 12KV or more) you may in fact see spark when tested without compression but as soon as you try to run the unit the spark disappears.

4. They never move ahead to the next possible issue. Someone once told me that the definition of insanity is doing the same thing over and over again expecting a different result. If you have no spark, for example, cleaning your sparkplug and retesting and retesting isn’t going to get you spark. You need to know how the ignition system on your engine works and properly fault find the issue at hand moving ahead and systematically removing what could be causing the issue.

5. They don’t seek professional assistance. Sometimes a problem is bigger than you can handle, or maybe you need to learn some things to resolve a specific small engine problem. Going to your neighbour who tuned up his lawnmower at the start of the year, or your local automotive repairman won’t get you what you need. Automotive isn’t what it used to be and unless your mechanic was wrenching in the 1970s then he probably doesn’t really understand your small engine. This is because they are designed and operate differently. Cars and trucks have computers and modules that are tested using a code reader whereas your snow blower does not. If you don’t know how a small engine operates exactly, then you probably will never solve your problem. I don’t ask my dentist why my back hurts and I doubt you do either.

So if you’re trying to resolve an issue with your lawnmower, snow blower, or riding mower, remember these simple mistakes and avoid them. Seek out a reliably trained and experienced Small Engine Technician and ask his advice. Learn to do simple trouble shooting and fault finding techniques that are proven and work every time because they follow the basic principle of how small engines work.

Best regards,

Al

P.S. You can download a free checklist that will work with any small engine running problem here.

Al Smith

[http://www.theglobalsmallenginecommunity.com/]

Stihl Master Service Technician, Husqvarna University qualified, Kohler & Briggs certifed, Toro, Lawnboy, MTD and many other qualifications and experience.

I used to be the service manager for a large local small engine shop and now am exploring online options for business as well as servicing select customers equipment to maintain and repair them. They include all kinds of small engine powered units from trimmers and chainsaws to riding mowers and zero-turn units. I have been a mechanic both as a hobbyist and as a professional since 1987, served 20 years in the Canadian Air force, and have rebuilt Motorcycles, Trucks, Snowmobiles, and anything else I could get my hands on.

I am highly respected in my local community and believe that anyone can do anything provided they have the desire to learn and the resources available to them. My online goal is to provide quality information at reasonable costs (free if possible) on small engine maintenance and repair to assist the person with the desire.

You can see me on different posts as TheAlSmith and providing answers as an expert at AnswerGem in their small engine forum.

Lemmings are cute, but dumb. If you tell them to jump off a cliff, they will. Just like the people who start blogs because everyone is doing it. Guess what happens after a little while? The blogs die.

In managing a list of many Web sites, most of which are blogs, I deleted countless sites from the list because the sites and blogs no longer existed. The people ran out of steam or had no reason to start them in the first place.

How do you know when a blog is right for your business? Learn why people start blogs, how they find their niche and how blogging tools can be used for more than blogs.

Some people like to read blogs, others like to read newsletters, still others like to rely on feeds and some read a few or all of them. No matter the method the information is distributed, each medium has one thing in common: content. Having a blog connects your newsletter and your business with all of these readers and delivers important content in a particular style.

I’ve been blogging since June 2000. If you review my early blog entries in meryl’s notes, you’ll notice they’re more personal. When blogs first hit the scene in the late ’90s, they were personal diaries and journals. Like the blog business, my blog has transformed from personal to business speak, although I still add personal notes here and there.

A few bloggers tend to talk about their work, their products and their little world. That might work for celebrities where fans want to know everything about them, but it doesn’t work for the average business person. Other business people want information on how to succeed and when a blog spends time hawking products offering information of no value, few people will return. The people whose products sell well are the ones who provide valuable information. Readers already know what kind of information they’re getting, so they trust that when they buy something, it will be of the same or better quality. This value must be reflected in their blog. It’s much like people who only sign up for a newsletter after first seeing an example.

No one wants to be a lemming (I would hope). How do you decide whether or not to set up a blog? The answer isn’t black or white (what did you expect?). Ask these questions:

• Can you regularly update it — at least five times a week?
• Do you have something to say other than just linking to others?
• Do you read other blogs or feeds?
• Can you provide information of value to others not just to yourself?
• How large is your newsletter subscriber list?
• How many unique visitors do you get on an average day, week or month?

The big decider is whether or not you can write in the blog almost daily. The people behind the high traffic blogs post multiple times a day. Though resourceful, merely linking to other sites doesn’t give visitors much reason to make the effort to come to yours. Reading other blogs or feeds is a great way to learn how to carry a discussion. Find other blogs covering topics similar to yours and check them out. Disagree with their opinions? Write about it and explain your reasons. Cross-blog discussions are common, and that’s where trackback comes in handy.

Trackback is a blog feature. If you decide to comment on another blog posting in your blog instead of in that blog’s comments page, then you link to the conversation through the trackback link. Trackback is similar to the permalink, the permanent URL for the blog entry, but it has a different URL for copying and pasting in your blog’s trackback box.

Aside from the technical aspects of operating a blog on a daily basis, subscriber list size and Web site traffic are good indicators of what kind of reaction you’ll get when opening a blog. Starting from scratch with little traffic means you have a long road ahead and lots of work to do. There is no magic formula anyone can sell you for $97 to make your blog an overnight success. But with some perseverance and ingenuity, your blog can engage many prospects and clients.

Considering there are numerous blogs out there, pick a niche topic when starting a blog for a better shot at attracting and keeping an audience. meryl’s notes focuses on three areas: webby, geeky and wordy. In reality, this is too much. What I need to do for my readers is create three separate blog entry points, so those interested in writing, newsletters and Internet marketing get nothing but the wordy entries. Those interested in Web design get the webby stuff and the technophiles receive the geeky content.

I also manage a personal blog separate from meryl’s notes. It’s about cochlear implants and deafness. This could fall under the geeky category, but it’s a personal blog and doesn’t belong in meryl’s notes. This blog is written for a different audience.

The blogging tools for both of my blogs come with syndication capabilities so those using feed readers or aggregators can read the content through the software. When sending a new issue of a newsletter, comment on it or link to it in the blog, that way the blog and feed readers will get the goods, so all three bases are covered.

Blogging tools aren’t just for, well, blogging. Such tools are an excellent way to help you update your Web site more often than you otherwise would. I use it to manage the list of tableless Web sites. Using blogging tools is much easier than the way I managed it before, updating the HTML files by hand. Though using a blog tool, it isn’t a blog. In this case, the blog tool has become a content management system (CMS).

Small business owners don’t have a need for the fancy and pricey CMSes out there. They find it easier to use blogging software to manage their sites or hire someone to adapt the tool for their site.

Blogs have found a place in businesses and people are finding creative ways to use them. Some companies have a blog on the intranet for communicating project status, jeopardies and metrics. They’re used for knowledge management. With information pouring in, blog tools provide a way to share, organize and process the information.

Being a follower can be good or bad. No one wants to walk off a cliff with the lemmings, but everyone wants to succeed. Best practices won’t help, since the decision to blog is based on the organization’s mission, needs and goals along with its target market’s desires and needs. A blog about lemmings? There is one, sort of. Or maybe you’d like to start your own and talk about dumb business moves.

Meryl K. Evans is the Content Maven behind meryl.net who increases conversion rates by writing and editing content so organization can focus on their core business. She is the editor-in-chief of the eNewsletter Journal and Shavlik’s The Remediator Security Digest. Visit her Web site at http://www.meryl.net/blog/.

Looking for a good online family movie club or family movie review?

Family movies sell lots of tickets at the box office and every year there are one or more blockbuster movies that are family films.

But with the high price of movie tickets and theatre concessions, watching movies on DVD as a family movie night in the comfort of your own home, is quickly becoming very popular.

Online DVD Movie Clubs

Online there are a number of DVD movie clubs that include family movies in their rental libraries, but only a few actually specialize in providing quality family fare.

While other companies produce some family pictures, none has come close to the huge library of movies that Disney has given us.

Walt Disney brought us Steamboat Willie in 1928 starring Mickey Mouse and in 1973, the Disney Studios gave us Snow White, the first feature length animated movie.

Disney Movie Club

Online the Disney Movie Club offers their signature classic movies, recent releases, preschool videos, sing-a-long video and other popular family choices.

Movie Clubs

Other online family movie clubs include Family Pass (formerly known as Mentura) which bills itself as “your ticket to family entertainment.” Family Pass carries a wide selection of movies, television programs, educational and home school videos and spiritual fare. All targeted at a family audience.

Edited Movies

Another popular source of movies suitable for family viewing comes from companies that specialize in editing movies to remove profanity, excessive violence and more adult situations.

Club members can rent the edited, version of popular movies that might otherwise be far less than family friendly.

Online clubs that edit movies include CleanFilms, Flick’s Club, Family Edited DVDs and CleanFlix to name a few.

DVD Software Filters

A company called ClearPlay offers DVD software that removes graphic violence, profanity and more adult situations. Movie filters are put together for specific movies and ClearPlay’s list continues to grow.

Family Movie Reviews

Online is also a great place to discover family movie review sites that help parents when it comes to deciding which movies to see in theatres or on DVD.

The Dove Foundation, long a family movie advocate, provides online movie and video reviews. And if you’re out shopping for movies or videos at your favorite store, you can look for the Dove Foundation’s Seal of Approval (much like the “Good Housekeeping Seal of Approval”). The Dove Foundation’s seal is only awarded to movies and videos that meet certain family viewing standards and have been screened and reviewed by Dove Foundation reviewers.

Other movie reviews available online include The Family Style Movie Guide, Movie Mom, Screen It!, Family Cow, Grading the Movies, Kids-In-Mind, and Ted Baehr’s MovieGuide which examines and rates movies from a Christian value stand point.

Family Movie Night

Watching movies at home on DVD as a special night for the entire family has become very popular.

Why spend a small fortune taking your family to see a movie at a theatre when you can have quality fun time in your own home? With a special movie night you control the films your family sees. No more unpleasant surprises! And you’re guaranteed the best seat in the house.

DVD Movie Club

It’s easy to join an online movie club that offers movies for the family or better yet “specializes” in family movies and video.

So take a look at what’s on the internet and join a family movie club. Most offer a variety of special benefits to club members that make online club membership very convenient and affordable.

Then pick up some delicious popcorn and some other treats and start the wonderful tradition of family movie night in your home, a tradition you and your children will fondly remember for years to come.

And remember, some of the best and most popular films of all time have been family movies.

To learn more visit http://fun-dvd-movie-club.blogspot.com/2008/08/blockbuster-dvd.html right now

Trading the Forex market has become very popular in the last years. Why is it that traders around the world see the Forex market as an investment opportunity? We will try to answer this question in this article. Also we will discuss come differences between the Forex market, the stocks market and the futures market.

Some of the benefits of trading the Forex market are:

Superior liquidity.

Liquidity is what really makes the Forex market different from other markets. The Forex market is by far the most liquid financial market in the world with nearly 2 trillion dollars traded everyday. This ensures price stability and better trade execution. Allowing traders to open and close transactions with ease. Also such a tremendous volume makes it hard to manipulate the market in an extended manner.

24hr Market.

This one is also one of the greatest advantages of trading Forex. It is an around the click market, the market opens on Sunday at 3:00 pm EST when New Zealand begins operations, and closes on Friday at 5:00 pm EST when San Francisco terminates operations. There are transactions in practically every time zone, allowing active traders to choose at what time to trade.

Leverage trading.

Trading the Forex Market offers a greater buying power than many other markets. Some Forex brokers offer leverage up to 400:1, allowing traders to have only 0.25% in margin of the total investment. For instance, a trader using 100:1 means that to have a US$100,000 position, only US$1,000 are needed on margin to be able to open that position.

Low Transaction costs.

Almost all brokers offer commission free trading. The only cost traders incur in any transaction is the spread (difference between the buy and sell price of each currency pair). This spread could be as low as 1 pip (the minimum increment in any currency pair) in some pairs.

Low minimum investment.

The Forex market requires less capital to start trading than any other markets. The initial investment could go as low as $300 USD, depending on leverage offered by the broker. This is a great advantage since Forex traders are able to keep their risk investment to the lowest level.

Specialized trading.

The liquidity of the market allows us to focus on just a few instruments (or currency pairs) as our main investments (85% of all trading transactions are made on the seven major currencies). Allowing us to monitor, and at the end get to know each instrument better.

Trading from anywhere.

If you do a lot of traveling, you can trade from anywhere in the world just having an internet connection.

Some of the most important differences between the Forex market and other markets are explained below.

Forex market vs. Equity markets

Liquidity

FX market: Near two trillion dollars of daily volume.

Equity market: Around 200 billion on a daily basis.

Trading hours

FX market: 24hr market, 5.5 days a week.

Equity market: Monday through Friday from 8:30 EST to 5:00 EST.

Profit potential

FX market: In both, rising and falling markets.

Equity market: Most traders/investor profit only from rising markets.

Transaction costs

FX market: Commission free and tight spreads.

Equity market: High Commissions and transaction fees.

Buying power

FX market: Leverage up to 400:1.

Equity market: Leverage from 2:1 to 4:1.

Specialization

FX market: most volume (85%) is made on major currencies (USD, EUR, JPY, GBP, CHF, CAD and AUD.)

Equity market: More than 40,000 stocks to choose from.

Forex market vs. Futures market

Liquidity

FX Market: Near two trillion dollars of daily volume.

Futures market: Around 400 billion dollars on a daily basis.

Transaction costs

FX market: Commission free and tight spreads.

Futures market: High commissions fees.

Margin

FX market: Fixed rate of margin on every position.

Futures market: Different levels of margin on overnight positions than day time positions.

Trade execution

FX market: Instantaneous execution.

Futures market: Inconsistent execution.

All this makes the Forex market very attractive to investors and traders. But I need to make something clear, although the benefits of trading the Forex market are notorious; it is still difficult to make a successful career trading the Forex market. It requires a lot of education, discipline, commitment and patience, as any other market.

Raul Lopez is a full time Forex trader and founder of http://www.straightforex.com; high quality Forex training and a Forex trading course provider.

Before you begin to actually look at tractors you should know exactly what you are looking for.

Consider the following questions when shopping for a tractor.

What size of tractor do you need?

What are you going to be using you tractor for?

How often will the tractor be used?

Is the tractor going to be used to produce income? Of course, money is often a consideration when shopping for a tractor. Consider talking to people that own tractors and get their opinions.

Be an informed shopper and don’t let anyone rush you. Below are some other things to consider before you begin shopping for a tractor.

Tractor Size

This is obviously the most commonly asked questions regarding a tractor purchase. The average compact tractor consumer owns a 1-5 acre piece of property and uses the small compact diesel mostly for mowing The other tractor consumers usually have between 10-30 acres and needs about a 30 horsepower to complete the necessary tasks.

What are you going to use the tractor for?, is of course, the most important question to answer. Is it just for mowing or will you be using a loader or backhoe on it? Will you be working on rocky or uneven ground?

Dollars & Sense

You should definitely shop around, however, don’t forget that if you are comparing the prices of different makes and models of tractor it can sometimes be much like comparing apples to oranges. As with anything else, some makes and models are made better than others. A few more dollars upfront in price for a better quality of tractor makes more ’sense’ than having to pay the cost of constant repairs and maintenance.

Different Makes and Models of Tractors

If at all possible, one of the best things you can do to make your life easier, is to purchase a tractor that is easy to get parts for. There are many foreign makes and models that are exact matches to domestic tractors. With that in mind, you can get a parts book for U.S. made tractor and purchase the corresponding part numbers that way. Some parts dealers don’t like to sell parts for a gray market tractor. In fact, dealers of some brands of tractors are being told by a higher authority that they cannot willingly sell parts for gray market tractors.

Diesel Engines

Make sure you get a tractor with a diesel engine. Diesel engines have better performance and usually last longer than gas engines. Implements also work better on diesel engine tractors.

Horsepower

Approximately how many horsepower will you need? One horsepower (hp) is the amount of energy required to lift 550 pounds, one foot, in one second. In a tractor the energy is produced from torque and engine speed. A 100 hp tractor is one with a maximum of 100 horsepower available at the power-takeoff (PTO) outlet.

PTO

Nearly all Japanese tractor manufacturers include the power take off (PTO) horsepower (hp) in their model numbers; however, they do not include the engine (fly) hp. The first two numbers of the model number is where you find the PTO hp. The PTO hp is important because it is telling you the equipment working power of the tractor. It tells you what horsepower that equipment requiring a PTO will get from the tractor. Click here for a more in depth explanation of PTO.

Cylinders

Consider getting a three or four cylinder tractor. Three and four cylinder tractors are generally newer tractors and run quieter and smoother than the two cylinder models. Transmissions

There are several different types of transmissions for tractors. If you are not knowledgeable about tractor transmissions, it would be a good idea if you familiarize yourself with the different types listed below, so that when you go out to shop for a tractor you will well informed.

Manual transmissions on tractors were made to be shifted while the tractor is not in motion. This will cause a grinding noise due to the fact the two gears that are trying to mesh are rotating at different speeds. Manual shift transmissions are known for their durability, however, they are not considered to be very user friendly. The sliding gear and the collar shift are two of the more common transmissions.

Synchro Shift transmissions are basically collar shift transmissions (a type of manual transmission, see above). The difference is the added synchronizers, which makes it so that the gears don’t grind if you are trying to shift while the tractor is in motion. Some synchro shift transmissions only have one pair of synchronized gears, while others have all speeds synchronized, including forward and reverse. The synchronization of forward and reverse is called the shuttle shift. This synchro shift is a dependable transmission, however, just like with automobiles, the more ‘tricky’ the tranny is, and the more chance there is of something going wrong or breaking.

A Power Shift transmission is an option well worth considering. Not those standard shift transmissions won’t work just fine; however, often power shift is a nice little luxury, depending on what you are going to be using the tractor for. With a power shift transmission you can choose different speeds while the tractor is in motion, without needing to use the clutch pedal.

Hydrostatic transmissions operate in a closed loop, the flow of the pump is reversed, which in turn causes the tractor to reverse directions. The hydrostatic transmission is considered to be very dependable and is able to defend itself against ‘operator difficulty’. Because this is transmission is controlled by a foot pedal, when you take your foot off of the pedal the tractor will stop, this is a nice safety feature. Hydrostatic is considered the best selection for such things as large mowing jobs because it allows for easy direction change and continual, unchanging speed.

Implement Adaptability

You will want a tractor with a Category 1, 3-point hitch and standard rotation PTO shafts. Most imported compact tractors are equipped with these items; however, there are a few that are not.

Implement Availability

Before you purchase a a tractor, make sure that good quality implements are available for it. It is a good idea to try to find a tractor with as many model-specific attachments as possible. These include things such as loaders and backhoes, which have custom-fitted mounts that are not interchangeable with other makes and models of tractor. You can often save money if you purchase the implements at the same time you purchase the tractor and some implements can be very expensive to add on at a later time.

Parts Manuals

Sometime parts manuals can be very hard to acquire. Make sure there is one available for the tractor you choose. Ask how much the manual is, sometimes the cost can be over $100.00 dollars.

Warranty

Find out what kind of a warranty comes with the tractor. Find out what it covers and for how long. Below is a checklist that you can print and take with you when you are out shopping for a tractor. Just check things off and take notes as you check over the prospective tractor.

Yes, it’s a very long checklist, but well worth your time if you want to get a good quality tractor at a fair price.

Some things on the checklist may not pertain to the type of tractor you are looking for; however, we believe that most folks will find the majority of information here to be very helpful.

Your goal is to ensure that the tractor you purchase is all that the seller says it is and doesn’t have any hidden problems. Make sure you know what you are looking for. Know what options you must have on the tractor and which ones you might be willing to compromise on or be able to add later.

Tractor Buyer’s Checklist

Make_____________________________ Model _____________________ Year _________ Hours

On Meter________ Asking Price $____________

Seller’s Name _____________________________ Phone ______________

Tractor Location _______________________________________________

Yes/No Notes

Visual Exterior Inspection

Does the overall appearance of the tractor look as if it has been cared for?

Why is the tractor for sale?

Is the paint faded?

Is the sheet metal straight?

Are there a lot of ‘dings’ in the tractor?

Are there any decaying rubber or plastic components?

Are there any structural cracks? Look closely for hairline cracks.

Is there anything that looks like a ‘makeshift’ repair job?

Are the tires in good condition with good tread left on them?

Is there a calcium mixture added to the tires for better stability?

Is there still good tread left on the tires?

Is the seat in good condition?

Does it have a standard 3-point hitch?

Are there any puddles of fluid under the tractor?

Are there any oil spots on the ground around the wheels?

Engine Inspection

Is the engine warm?

Are there oil and/or fuel on the engine?

Can you see any seals leaking?

Is there oil around the rear axles, near the rear wheel?

Is there oil around the PTO seals?

Are there oil leaks around the output shaft seals gearboxes? (4WD

Is the engine oil at or near the full mark?

Is the front axle dipstick at or near the full mark? (4WD)

Does the oil look clean? Black is ok for diesel engines.

Are there creamy white droplets near the top of the dipstick?

Are all the filters U.S. made?

Is the air filter intact?

Does the air filter have any tears or holes in it?

Is the fuel filter clean?

Is the fan belt tight and in good shape?

Does the air inlet tube have any cracks or holes in it?

Is the water in the radiator dark green? This is a good thing.

Does the radiator water have a milky looking scum to it?

Is there flaking or discolored paint around the radiator cap?

Is there moisture along the bottom of the radiator?

Is there any slop in the steering linkages?

Did you closely look over the tractor a second time to make sure you didn’t miss anything?

Running Engine Inspection

Does the oil pressure register when you just turn the key?

Start the tractor. Does it start easily?

Does the oil pressure light go off or the oil gauge go up to about 30-80 psi?

Do all of the other lights go off?

Is the voltage meter (if it has one) charging a full 13.5-14.5 volts

Did you rock the steering wheel from left to right? Do this with the engine running if the

tractor has power steering.

Does the PTO spin in all gears?

Does the 3-point hitch work properly?

Does the tractor continue to smoke after it warms up?

Driving The Tractor (This is the fun part)

Does the tractor work through all of the gears?

Does the power shift feel ‘weak’ when shifting?

Is there any slippage when you quickly accelerate into high gear?

Does the 4WD engage properly?

Does the clutch slip?

Do the brakes work well?

Did you check the brakes by pushing one pedal at a time in low gear?

Does the tractor make any clunking noises from inside the engine?

Does the charging system work properly?

Do the wheels wobble at all?

Hydraulics

Are the control levers in good shape and not flopping around?

Are the pivot pins badly worn?

Does any oil seep out of the extended spools (control valves)?

Are the hydraulic couplers capped?

Does the hydraulics work correctly?

Post Driving Inspection

Did the temp gauge ever get above the recommended temperature?

Did the temp light ever come on while you were driving it?

Did the tractor overheat?

Did the tractor run well even after it got hot?

Do you see any new leaks from the radiator?

Do you see any new oil and or fluid leaks?

Did you see excess smoke when you removed the oil cap?

Did you closely look over the tractor a third time to make sure you didn’t miss anything?

I Hope this has been a lot of information that you where looking for and you will use this information to your advantage and be safe with it.

Ebooks and Articles are the Love of my Life. Visit Me [http://www.macsebooksparadise.com]

Sherry Cochran [http://www.macsebooksparadise.com]

Offering hand crafted children’s furniture online for sale is a terrific niche market. If you drill down a bit more you will find that you can offer items like tables and chairs sets, small bookcases and wall decorations. People love anything that is handcrafted and do not seem to mind spending money to make their kids rooms look great. Add the fact the children’s demographic is continuous, and you have a terrific market opportunity. Demand is strong for this market if you approach it with a good plan and a sensible mind.

Pros and Cons

Cons

First of all, anything that is hand crafted involves significant time. If you plan on making the items yourself, it can involve an amazing amount of time. I started out in this business out of the passion of creating something special. I quickly learned that the time to make each unit actually ate away at my bottom line because of the time it took to make the units. If your items are painted you have to contend with sanding, priming, painting at least two coats, artwork and sealing the project. Any shortcuts you can make will help cut down on your assembly time. If I were to coach someone through this process today, I would recommend having someone cut your parts or even supply everything you need. Anything you can do in this capacity will save you time which means you save money.

Pros

Just about everything today is made overseas. Finding good quality craftsmanship with a personal flair is getting harder and harder. You can build up a great following if you can offer special made items. Younger children’s items like tables and chairs do especially well. Targeting the right crowd of buyers also helps you sell for a better price. The “walmart” price conscious buyer is not who you are really after. Goods on the very high end also do well offering a higher margin but less frequency of sales. Of course this all is a matter of research. We made the habit of using commercial artists that were just starting out and willing to work for reasonable items. We would offer to name a line of products using their name and that had some good selling appeal. Who would not like having their own furniture line? (it reminds me of giving a person a title instead of a raise, but it does work)

Another technique that works well is outsourcing your parts after you develop a good feel for what is selling. There is nothing wrong with importing chairs or blank parts to help cut down your production time. Submit your own designs and many importers will build to your exact specifications. Finishing the product yourself using this technique can still be labeled with the handmade label. This is a powerful technique but you have to order parts in larger quantities to make it work best.

If you are thinking about setting out to specialize in this field, it can be very rewarding. Knowing the obstacles before you get into is, can make the difference between staying in the market or moving on to something else.

Ken Schulte is a contributing editor to http://www.routertabledepot.com as well as a coach for small business specializing in manufacturing.

Institutions of education, and the system of which they are a part, face a host of unprecedented challenges from forces in society that affect and are influenced by these very institutions and their communities of learners and educators. Among these forces are sweeping demographic changes, shrinking provincial budgets, revolutionary advances in information and telecommunication technologies, globalization, competition from new educational providers, market pressures to shape educational and scholarly practices toward profit-driven ends, and increasing demands and pressures for fundamental changes in public policy and public accountability relative to the role of higher education in addressing pressing issues of communities and the society at large. Anyone of these challenges would be significant on their own, but collectively they increase the complexity and difficulty for education to sustain or advance the fundamental work of serving the public good.

Through a forum on education, we can agree to: Strengthening the relationship between higher education and society will require a broad-based effort that encompasses all of education, not just individual institutions, departments and associations.

Piecemeal solutions can only go so far; strategies for change must be informed by a shared vision and a set of common objectives. A “movement” approach for change holds greater promise for transforming academic culture than the prevailing “organizational” approach.

Mobilizing change will require strategic alliances, networks, and partnerships with a broad range of stakeholders within and beyond education.

The Common Agenda is specifically designed to support a “movement” approach to change by encouraging the emergence of strategic alliances among individuals and organizations who care about the role of higher education in advancing the ideals of a diverse democratic system through education practices, relationships and service to society.

A Common Agenda

The Common Agenda is intended to be a “living” document and an open process that guides collective action and learning among committed partners within and outside of higher education. As a living document, the Common Agenda is a collection of focused activity aimed at advancing civic, social, and cultural roles in society. This collaboratively created, implemented, and focused Common Agenda respects the diversity of activity and programmatic foci of individuals, institutions, and networks, as well as recognizes the common interests of the whole. As an open process, the Common Agenda is a structure for connecting work and relationships around common interests focusing on the academic role in serving society. Various modes of aliening and amplifying the common work within and beyond education will be provided within the Common Agenda process.

This approach is understandably ambitious and unique in its purpose and application. Ultimately, the Common Agenda challenges the system of higher education, and those who view education as vital to addressing society’s pressing issues, to act deliberately, collectively, and clearly on an evolving and significant set of commitments to society. Currently, four broad issue areas are shaping the focus of the Common Agenda: 1) Building public understanding and support for our civic mission and actions; 2) Cultivating networks and partnerships; 3) Infusing and reinforcing the value of civic responsibility into the culture of higher education institutions; and 4) Embedding civic engagement and social responsibility in the structure of the education system

VISION We have a vision of higher education that nurtures individual prosperity, institutional responsiveness and inclusivity, and societal health by promoting and practicing learning, scholarship, and engagement that respects public needs. Our universities are proactive and responsive to pressing social, ethical, and economic problems facing our communities and greater society. Our students are people of integrity who embrace diversity and are socially responsible and civilly engaged throughout their lives.

MISSION The purpose of the Common Agenda is to provide a framework for organizing, guiding and communicating the values and practices of education relative to its civic, social and economic commitments to a diverse democratic system.

GUIDING PRINCIPLES

I believe social justice, ethics, educational equity, and societal change for positive effects are fundamental to the work of higher education. We consider the relationship between communities and education institutions to be based on the values of equally, respect and reciprocity, and the work in education to be interdependent with the other institutions and individuals in society.

We will seek and rely on extensive partnerships with all types of institutions and devoted individuals inside and outside of higher education.

We realize the interconnection of politics, power and privilege. The Common Agenda is not for higher education to self-serve, but to “walk the talk” relative to espoused public goals. We understand the Common Agenda as a dynamic living document, and expect the activities it encompasses to change over time.

THE COMMON AGENDA FRAMEWORK The general framework for the common agenda is represented in the following diagram. It is clear that while goals and action items are organized and aliened within certain issues areas, there is considerable overlap and complimentarity among the issues, goals and action items. Also, following each action item are names of individuals who committed to serve as “point persons” for that particular item. A list of “point persons,” with their organizational affiliation(s) is included with the common agenda.

ISSUES

ISSUE 1: MISSION AND ACTIONS

Public understanding more and more equates higher education benefits with acquiring a “good job” and receiving “higher salaries.” To understand and support the full benefits of higher education the public and higher education leaders need to engage in critical and honest discussions about the role of higher education in society. Goal: Develop a common language that resonates both inside and outside the institution. Action Items: Develop a common language and themes about our academic role and responsibility to the public good, through discussions with a broader public.

Collect scholarship on public good, examine themes and identify remaining questions. Develop a national awareness of the importance of higher education for the public good through the development of marketing efforts.

Goal: Promote effective and broader discourse. Action Items: Raise public awareness about the institutional diversity within and between higher education institutions.

Identify strategies for engaging alumni associations for articulating public good and building bridges between higher education and the various private and public sector companies. Develop guidelines of discourse to improve the quality of dialogue on every level of society. Organize a series of civil dialogues with various public sectors about higher education and the public good.

ISSUE 2: DEVELOPING NETWORKS AND PARTNERSHIPS

Approaching complex issues such as the role of higher education in society that requires a broad mix of partners to create strategies and actions that encompass multiple valued perspectives and experiences.

Broad partnerships to strengthen the relationship between higher education and society involves working strategically with those within and outside of higher education to achieve mutual goals on behalf of the public good.

Goal: Create broad and dispersed communication systems and processes.

Action Items:

Create an information and resource network across higher education associations Create information processes that announce relevant conferences, recruit presenters and encourage presentations in appropriate national conferences Develop opportunities for information sharing and learning within and between various types of postsecondary institutions (e.g. research-centered communities).

Goal: Create and support strategic alliances and diverse collaborations.

Action Items: Establish and support on-going partnerships and collaborations between higher education associations and the external community (e.g. civic organizations, legislators, community members) Explore with the public how to employ the role of arts in advancing higher education for the public good Promote collaboration between higher education and to address access, retention, and graduation concerns

ISSUE 3: INSTILLING AND REINFORCING THE VALUE OF CIVIC RESPONSIBILITY INTO THE CULTURE OF HIGHER EDUCATION INSTITUTIONS

Education should attend to the implicit and explicit consequences of its work, and reexamine “what counts” to integrate research, teaching and service for the public good to the core working of the institution.

Goal: Emphasize civic skills and leadership development in the curriculum and co-curriculum.

Action Items: Develop and implement a curriculum in colleges and universities that promote civic engagement of students Create co-curricular student and community programs for leadership and civic engagement development Develop learning opportunities, inside and outside of the classroom, that promote liberty, democratic responsibility, social justice and knowledge of the economic system Develop student leadership and service opportunities that focus on ethical behavior Teach graduate students organizing and networking skills, and encourage student leadership and Diversity education

Goal: Foster a deeper commitment to the public good.

Action Items: Work with faculty on communication skills and languages to describe their engagement with the public, and educate faculty for the common good Identify models for promotion and tenure standards Identify models for faculty development

Goal: Identify, recognize, and support engaged scholarship.

Action Items: Identify and disseminate models and exemplars of scholarship on the public good Encourage the participation in community research Help institutions call attention to exemplary outreach. Establish a capacity building effort for institutions

Goal: Bring graduate education into alignment with the civic mission.

Action Items: Work with disciplinary associations to hold dialogues on ways graduate student training can incorporate public engagement, involvement and service Promote “civic engagement” within academic and professional disciplines according to the disciplines’ definition of “civic engagement” Incorporate the concept of higher education for the public good into current graduate education reform efforts

ISSUE 4: EMBEDDING CIVIC ENGAGEMENT AND SOCIAL RESPONSIBILITY IN THE STRUCTURE OF THE HIGHER EDUCATION SYSTEM

Promoting the public benefits of higher education requires system efforts beyond institutions to intentionally embed values of civic engagement and social responsibility in governance practices, policy decisions, and educational processes.

Goal: Align governing structures and administrative strategies.

Action Items: Develop ways to improve student and the community involvement in the governance and decision making process of educational institutions. Identify and promote ways for institutions to improve involvement with the public and the practice of democracy within their own institution. Establish public good/civic engagement units that orchestrate this work throughout institutions.

Goal: Publicly recognize and support valuable engagement work.

Action Items: Offer public awards that reward institutions with demonstrable track record in serving the public good in order to encourage institutionalization of performance around the public good and civic engagement.

Develop a comprehensive inventory of funding sources, association activities, initiatives, and exemplary practices that advance the public good. Identify, recognize, and support early career scholars who choose to do research on higher education and its public role in society.

Goal: Ensure that assessment and accreditation processes include civic engagement and social responsibility.

Action Items: Identify service for the public good as a key component in provincial and federal educational plans (e.g. Master Plans, provincial budgets, and professional associations).

Bring higher education associations and legislators together to broaden current definition of student outcomes and achievement, and develop a plan for assessment.

Develop strategies and processes to refocus system-wide planning, accreditation and evaluation agendas to consider criteria assessing the social, public benefits of education.

Goal: Cultivate stronger ties between the university, federal and provincial government.

Action Items: Develop a 2-year implementation plan that joins the university rector / Pro-rector and Director with provincial legislators to engage in an assessment of the needs of the public by province Host a series of dialogues between trustees and provincial legislators to discuss the role of universities and public policy in advancing public good at a local, provincial, and national level.

Ms. Afshan Saleem
Senior Lecturer
Bahria University
Karachi

Build a career planning tool box to achieve career success.

We all have our favorite coaches, and if they coach our favorite athletic team, it’s a plus. Tom Landry tried to measure the character of his players. Vince Lombardi expected and achieved excellence. Dean Smith brought out the best in his players while playing within the rules. John Wooden spent extra time in designing the best practices possible. Superior coaching is about being our best and beyond.

A significant number of Coach Lombardi’s players, for example, achieved financial and personal success outside football. Coaching is about performance whether its career planning or on the athletic field. Effective career planning with an experienced job coach will help us get on the right career path to plan, manage and advance our career.

As a career planning guide the best coach to bring out your peak performance is the person you see in the mirror every morning. If you can’t pay for a personal career coach, or maybe there’s no one available or you aren’t ready, why not be your own career planning coach? Here’s a successful and winning game plan to follow:

1. Write out your Personal Career Planning Guide: Write out your career goals. Your career development plan should be specific and measurable. There is power in writing and planning your career goals. Put a copy up on your screen saver. Write out your career plan on 3×5 cards and place them where you can read them daily. Think about your career objectives and frequently bring them up to date. Celebrate whenever you reach a milestone. This step is the most important in your career planning tool box.

2. Focus on your Career Development: Eliminate distractions and keep your eye on your career goals. Life normally is full of frustrations and distractions. Successful coaches do not tolerate the things that drive most of us crazy – they take the time to stop, solve the problem and eliminate the distraction once and for all. Stay focused on your career plan.

3. Control your Surroundings: Top performers know that space management is as important as time management. They generally have neat offices, clean cars, orderly appointment books, and they plan for the unexpected, just in case. Make your space is as productive as possible and you can put your very best work.

4. Superior Performance Today: Don’t dwell on the past. It can’t be changed. Work your career planning strategy by doing your best today. Show up, be attentive, bear down and do your best. Your outstanding performance today will coach you to reach and exceed your future career plans. Many of life’s most important achievements are about doing a superior job right now, on the work that lies right in front of you. Dwelling on the big game next month will only cause you to lose focus on you career plans; the job in front of you is to get the most out of today’s work (practice) so when the big game arrives you’ll be more that ready to excel.

5. Build daily reading into your Career Plan: As part of your career plan, set aside some time to read something useful, motivating or fun every day. If you enjoy reading science fiction, for example, make a deal with yourself for every science fiction novel you read you’ll read two motivation or career related books. Plan on reading at least two books a month, build it into your career planning. Manage your other reading. Everything that comes across your desk or in your email does not have to be read. Use the delete button or the round file. You’ll now have more time to read something that advances your career plan. Reading will make a world of difference in coaching you to reach your career goals outlined in your career plan.

6. Make the time in your car Productive: During your commute or when you’re driving plan on listening to motivational, educational, learn a language, or just plain fun CD’s. The radio is wall to wall commercials or the latest murder and mayhem; not productive use of your time. You’ll be furthering your career plan by turning this unproductive time to into something useful. It’s always good career advice to surround yourself with the best information available.

7. Develop a Career Coaching Group: As you advance in your career you’ll come across people who can help you become successful. Stay in contact with them. Think of them as your “assistant coaches.” Run ideas by them, ask for their advice and be open to let them coach you.

8. Build Play and Fitness into your Career Plan: Get fit. Go for a long walk. Use the basketball hoop in the driveway. Have fun, laugh, enjoy the day with friends and family. Build play and fitness into your career plan. Be balanced in your career life planning. Don’t neglect the physical side of your career path planning.

10. Be Thankful of your Gifts: Look back on the past week. Ask yourself how many good days or events did you have in the past week. What made them good? Plan on doing more of the good stuff and less of the not so good. Be grateful and thankful to others. Practice a positive attitude.

Having a number of career planning guides like those listed above in your career tool box to assist you in your coaching will help keep you on your planned path. Having written career goals, with a career planning strategy and your books, CD’s, friends along with your routine will all help coach you to career success.

Search out the best resources you can find. Build your career plan into your daily routine. Overall your career planning should not be expensive and you’ll find it to be one of the best investments you’ll ever make. Coach yourself to success.

John Groth is a former HR executive and career coach. Find Career Planning Tools ,valuable articles and a free seven day career planning guide. Discover up to date career and recruitment strategies at our career idea blog; all to assist you in advancing and managing your career.

A tropical fish tank is a beautiful addition to any room and choosing the fish to be included is an enjoyable experience. Those who are considering investing in a tank will need to know the species can coexist together and when it’s safe to add fish into a new tank.

Those who are first starting out with a tropical fish tank will need to be aware of how many fish can be added based upon the size of their tank and the size of their new fish.

Tanks can hold 1″ of fish per gallon of water, so a tank that is 60 gallons would have room for 60″ of fish. Realistically those who own a tropical tank would never want to have that many fish. Fish that are large will shift more water and have more waste than a fish with a smaller body. In addition to this, a healthy tank will have gravel, equipment, plants and decoration. This will also reduce the amount of fish that is safe to add into a new tank.

New tank owners will want to consider whether they want to add adult fish or fry. If an adult is being purchased, then the fish will need to be measured from the head to the end of its tail. Those who are buying young fish will want to inquire about the full size of the fish when it matures. Stores often have information listed on the tank that can help new owners decide on the type of fish they wish to buy. This information includes the full size of a fish, temperament and eating habits.

A tropical fish tank should not be fully stocked at once. When the tank is tested for bacteria and nitrogen safety, then the tank is ready for occupants. However, only two fish each week should be added. New inhabitants into a tank change the tank’s environment. When first starting a tank, consider species that are resilient such as White Clouds and then introduce species like Tiger Barbs.

Consider stocking species that enjoy different parts of a tank, this will lead to a tank that is more appealing to watch. Certain breeds like to swim near the top of a tank; these include Betta’s and Hatchet fish. Fish that prefer the bottom of a tank are Catfish or Cory’s and fish that generally swim in the middle of a tank are Angels, Goldfish and Rainbows. Fish that prefer the middle of the aquarium are usually the prettiest.

A tropical aquarium is rewarding and relaxing. Those who add a variety of fish who dwell peacefully together will have many happy years with their tank.

If you would like to read more about Stocking a fish tank, then check out this article on Stocking a fish tank or visit the website www.TropicalFishTankSite.com to learn more about Stocking a fish tank today!

In the automotive employment market there are still very attractive job opportunities available all over the world. So if you are in the automotive employment market and want to make a change there are still a lot of opportunities all over the world.

In this modern world there do exist a massive shortage highly skilled automotive technicians all over the world. So if you are a highly skilled auto technician you can choose where you want to work in the world.

By just applying on one of the many automotive recruitment companies web pages, and they will search a job opportunity for you any place in the world. The fact is that a lot of emerging automotive markets have opened up in reasoned years, due to the power shift in the automotive industry.

This automotive employment market is going to become even bigger in the future as all new type of cars is going to hit the market. Like all the “EV” cars that are still in the prototype phase. All these cars will have new technology implemented into them, so new personnel must be trained to work on them in the future.

This will bring a paradigm shift into this automotive employment market, even the training methods and the skill sets that must be trained have to change in the very near future.

This will cause the manufacturers to start running extensive training and develop programs, to have highly skilled technicians to assist them to establish their brand. There will be coming new brands and brand name into the playing field and these brands will need to still build their names in the market place.

To build a brand name you need a powerful after sales service you can assist your customers with. This alone will create a new automotive employment market to the auto industry; just imagine an electronic or chemical engineer working at your local car dealership.

It may sound farfetched but it is possible as the cars in the future will be driven with power plants like fuel cells, hydrogen emission and electric motors. All of this is going to come to the market place in this modern world sooner than most of us do realize. So the predictions are that a big portion of the existing automotive workforce will leave.

They will leave this workforce as they are from the old school with old school principles that will become extinct with this new technology. The human tendencies are that you will stay ignorant if you become a member of the old school club. This only happens as the older people were conditioned that they can only learn something up to a certain age. All of us know this is not true but the system wants them to leave as it is harder to change and old horse to get rid of his or her habits

The system was created to develop a group of slaves that would be easier to condition, into what this slave system needs and not what the workers needs. That is one of the reasons why the older leading hands in the automotive employment market gets removed or retrenched. The general modern business conceptions are that older people are resisters to modern business, as they don’t want to change.

If all this highly skilled people are removed in the future the whole automotive industry will suffer a massive skills and brain lost that could have passed on to the younger people. Findings are that most of this older people in the automotive industry don’t want to share their knowledge and skills anymore, because they don’t see themselves as resistors for future development in the automotive industry.

So the automotive employment market will suffer great losses in the near future, due to this phenomenon.

About The Author

Rocco van Rooyen is an Author on Automotive Solutions. As an Entrepreneur and Author on the subject, he is at the forefront to provide solutions to all automotive related problems.

For more articles (or training) on Automotive employment or to get your FREE Mini Course to How to manage your Automotive Solutions go to http://automotivesolutionsforall.com.

Thinking of starting your own business this year, but don’t want to launch a business completely from scratch? Then consider a business opportunity often referred to as a turnkey business. With a business opportunity package you are purchasing a system of doing business that often comes with an instructional manual or a video. There are no royalties to pay but there are often no support or follow-up opportunities.

Business opportunity packages are greatly distinguished from franchises. With a franchise, you are getting involved in a long term relationship with a franchisee. You are purchasing their signage, logos, uniforms, and systems of doing business. There is no originality that you can bring to the business. You must support the proven franchised system of doing business.

There are fundamental differences between a business opportunity and a franchise. A franchised business is based on a proven method of doing business. Most often, franchised businesses are “look-a-like” businesses, meaning that signage, outfits, offerings, menu, vans, logos, etc. are identical. When you pay the franchise fee, you are purchasing the rights to use these clearly identified logos and business symbols from that particular franchise corporation.

In order to run the franchise, you must follow the rules and regulations as set forward by the franchisor. They will want you to attend training classes, perhaps attend an annual convention, and will want to make sure you keep up with their standards. According to the International Franchise Association, you are in business for yourself, but not buy yourself.

Many entrepreneurs like the idea of purchasing this proven system of doing business. The franchisor will even help pick the site and will help design the store, the restaurant or office center.

You will be required to pay royalties every year to keep your franchise operation. The royalty fees go to a national advertising fund and also to a general fund to keep the franchsor operating at a profit.

The Business Opportunity

When you purchase a “business opportunity” package you needn’t answer to anyone. You are purchasing instructions or some materials to conduct this business, but you are not purchasing a set of rules and regulations that you must follow to the letter.

Often, business opportunity packages are called “turnkey operations.” The theory is that all you have to do is to launch the business opportunity is buy the package, read the material, study the manual or video, “turn the key” and open your business. Some of these start-up business opportunity packages cost $100 or less. Others cost thousands of dollars. But there is one common denominator: the opportunity should be investigated. Remember, let the buyer beware. There are several ways to investigate a business opportunity.

. 1. Call telephone information for the city in which the company is based and ask for the number of the local Better Business Bureau (BBB). Call the BBB and ask if they have a “reliability report” filed on the company. This report provides information on the company and will include whether or not complaints have been filed on the company. It will also let you know how the company handled those complaints. Also try calling the National Fraud Information Center at 800-876-7060 and the Call for Action Hotline at 301-652-HELP.

. 2. Call the Chamber of Commerce in the town where the company is based. Just because the company might not be a member doesn’t mean they aren’t reputable. But ask the Chamber of Commerce if they know of any reason why someone shouldn’t do business with them. It doesn’t hurt to hear what the word of mouth is about a particular enterprise.

. 3. Call the Attorney General’s office in your state–often located in the State Capitol’s office. Also check with the Secretary of State’s office to see if there are any complaints filed on the company or if there are investigations pending.

. 4. Where did you hear about the business opportunity? At a local trade show? Through an ad? If it’s in an ad, call the magazine who carried the ad and ask to speak to the advertising department. Do they have information on the company? How long have they been in business? Do they pay their bills on time? Has the magazine or trade sponsor received any complaints about the company?

. 5. Use your judgment. As you study the ad, ask yourself, “can I figure out what the business opportunity is from this ad?” If not, then run in the other direction. They are trying to be evasive. If you can’t contact the company and get more information on what it is you are sending money to receive, then don’t send a dime. Remember the old line, if it sounds too good to be true, it probably is! Not in every case, but in many.

. 6. Ask the company offering the business opportunity package if you can get a list of folks who invested in the package during the last two years. If they are legit, and if they are proud of what they are offering, they will be happy to put you in touch with their satisfied customers. If they won’t do this, there very likely is something shady going on with that particular business opportunity program.

. 7. Companies that have a legitimate business opportunity package for you to look over–and we feature many of them in this magazine–should not be scared or dismayed if you want to receive some free additional information about the company before you invest in the program. This is a perfectly acceptable request.

. 8. The Federal Trade Commission offers a free package of information about the FTC Franchise and Business Opportunity Rule. Write to: Public Reference Branch, Federal Trade Commission, Washington, DC 20580 or call the FTC at 202-326-2222.

. 9. Use your instincts. If the opportunity doesn’t sound or seem just right to you, stay away. Do some more research before you get involved with the company and follow tips one through 8 to conduct your due diligence investigation about the business and the specific opportunity.

. 10. Don’t send money unless you completely understand what you are buying into, and even then, check it out before you send any money.

Steve Stanley is President of Tech Comp Associates, publisher of the Security Products Directory, visit: [http://www.securityproductsdirectory.com]